Beschrijving
Victron Blue Smart IP22 Battery charger 12/30(3)
The Blue Smart IP22 charger 12/30(3) has 3 outputs (see Figure 2) and built-in Bluetooth, making it easy to monitor voltage and current. Settings can also be changed and the battery charger updated as new features become available. For more information, see the web links below.
The 3 outputs allow simultaneous charging of three batteries or battery banks isolated from each other, saving space and money. A microprocessor-controlled adaptive 6-stage charging algorithm ensures optimum professional charging. This charger is suitable for 12V battery systems with a battery capacity between 150Ah and 300Ah and is ideal for installation using the brackets attached to the battery charger. The charger can be used for devices in the workshop and for boats and vehicles, such as (classic) cars, motorbikes, boats and motorhomes. All IP22 battery chargers are only for use in an enclosed space (indoors).
The Victron BlueSmart IP22 12/30(3) battery charger CEE 7/7 is intended for charging 12V battery systems from 230VAC. The charging current of this charger is 30A according to a six-stage adaptive intelligent charging algorithm, which can charge 12V battery systems with a battery capacity between 150Ah and 300Ah. The charger comes with 1.5 metres of 230V cable with a round CEE 7/7 contour plug for Schuko sockets.
All IP22 models have a plastic - aluminium housing with brackets for easy mounting. Battery cables (not included) can be connected to 13 mm² screw terminals. The compact design allows the Blue Smart IP22 battery chargers to be easily installed for indoor use in many environments, such as a garage, shed, storage, or in the boat or motorhome.
Bluetooth Smart. The Blue Smart IP22 battery charger is the wireless solution to monitor voltage and current, change settings and update the battery charger as new features become available.
Extremely efficient. With efficiency up to 94%, these battery chargers develop up to four times less heat compared to the industry standard. And once the battery is fully charged, power consumption drops to 0.5W. This is even five to 10 times better than the industry standard.
Adaptive 6-stage charging algorithm. The adaptive six-stage charging algorithm consists of: test - bulk charge - absorption charge - reconditioning - trickle charge - storage. The Blue Smart charger features microprocessor-controlled 'adaptive' battery management. The adaptive function automatically optimises the charging process depending on how the battery is used.
Storage mode. Storage mode reduces maintenance and aging when the battery is not in use. Storage mode is activated when the battery is not discharged for 24 hours. In that case, the float voltage is reduced to 2.2V/cell (13.2V for 12V battery) to minimise gassing and corrosion of the positive plates. Once a week, the voltage is increased again to absorption level to 'recharge' the battery. This prevents stratification of the electrolyte and sulphation, the main cause of premature battery failure.
Suitable for lithium-ion (LiFePO₄) batteries. LiFePO₄ batteries are charged using a simple algorithm of bulk charge - absorption charge - trickle charge.
Setting NIGHT and LOW. In NIGHT (night) or LOW (low current) mode, the output current is reduced to max 50% of the rated output current and the battery charger becomes completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be terminated manually.
Protected against overheating. The output current decreases when the temperature rises to 50ºC, but the Blue Smart charger does not fail.
